KIT1 BC B22 Bottle Lamp Light Kit with Inline Switch & Rubber Bung
KIT1 Bottle Lamp Light Kit with Inline Switch & Rubber Bung
This bottle lamp kit includes everything you need to create a beautiful bespoke table or floor lamp. Simply drill a 6.5mm or 10mm hole in a glass bottle or vase and use all the supplied components to complete your project.
Please note that the bottle is not included - When drilling the hole, please ensure that the correct drill bit and safety wear is used
Included in the Kit:
Lampholder: A premium brass or plated brass B22 BC large bayonet cap lampholder manufactured in the UK. Complete with matching metal shade ring for adding fabric, metal or glass shades if required - Available in 4 Finishes
Bung: A silicone bung that can be compressed when tightened to ensure a secure grip inside the bottle neck - Available in 4 Sizes
Pre-Made Switched Cord Set: 2.5 Metres (250cm) of UK Approved 3 Core Cable with Molded 3 Pin Fused Plug & Wired Inline Switch for Ease of Installation. The distance from Switch to Exposed Cable is approx 75cm. The 3 cores are prepared for immediate connection - Available in 3 Colours
Bung Cover: A matching bung cover will be supplied in the same finish as the Lampholder. Manufactured in the UK
Grommet: Depending on the size of the hole required, a transparent grommet will be supplied in either 6.5mm or 10mm diameter
Strain Relief: An opaque strain relief cord grip is supplied to give extra protection if required. Simply pass the flex in and out again to stop the cable being pulled out of the wiring.
Lampholder Certification: BS EN ISO 9001 (British Standards England) | Manufactured for Domestic & Commercial Applications
IF IN DOUBT THEN PLEASE GAIN PROFESSIONAL ADVICE or GET FITTED BY AN ELECTRICIAN
RETURNS POLICY
Consumers - We are happy to accept any returns within 14 days from order received. The products must be returned in a resaleable condition with no damage to the product or box. Full details of the returns policy can be found in our terms of business.
Business Customers - Please note we are unable to accept any returns from business customers. Full details of the returns policy can be found here in our terms of business.
If you are unsure of any product or policy offered by Lighting Spares then please feel free to email us at spares@birco-online.co.uk or tel 0121 783 2726.
SHIPPING
Delivery to the UK and Northern Ireland is only £4.95 for orders under the value of £50.00. If you spend £50.00 or more then deliveries are FREE. We would normally expect you to receive your order within 2-5 working days, however from time to time we may experience problems outside our control which would delay your order. Please allow 7-10 days for delivery especially in Northern Ireland, Off the mainland UK and some Scottish regions.
We are ordering products on a daily basis, however of you do have any time constraints, then please contact us prior to ordering to obtain an accurate delivery date - 0121 783 2726. In the unlikely event we are unable to make the schedules above, we will continue to communicate the expected receipt of your order.